How to use ECG & application of ECG Electrode
Allow the site to dry thoroughly.
Check the expiry date on the electrode package. Ensure that the electrode gel is fresh before placing the electrode on the patient.
Use one electrode brand for all electrodes placed on a single patient. Mixing electrode brands may cause a fuzzy baseline or a lead fault message.
ECG leads the placement of an electrode on a flat. non-muscular area to avoid motion artifact.
print or record the ECG Trace in ECG paper roll given by the manufacturer
Procedure for applying the electrodes may vary with the type of electrode:
Wet gel type-press down along the edge of the electrode so that all edges adhere firmly to the skin. Do not press the central contact area of the electrode.
Solid gel type-begin by pressing on the gelled area. Then apply pressure toward the outside of the electrode.
Replace the electrodes at least every 48 hours.
Reusable ECG electrodes can be applied after applying a little bit of ECG gel on the cup of the electrodes & then securing the electrode at a site using sticking tape or suitable adhesive tape.
Fasten the electrode leads with surgical tape (with an extra length of wire between the tape and the electrode).
ln operation theatres. please ensure that the disinfecting cleaning solutions do not come in contact with ECG electrodes.