CONTEC SPO2 Pulse rate Patient Simulator Oxygen saturation Simulator MS100
MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests
for the oximeter by simulation means, and gives cognizance of veracity about the oximeter.
- Separated connection between simulator probe and host, operation and test are more convenient.
- 262K color and 320*240 TFT, adjustable brightness level.
- Film key-press, makes the operation more comfortable.
- Power with chargeable lithium battery, can display the charge information of battery.
- Key volume, can open or close.
Main Functions
◆ Oxygen saturation simulation;
◆ Pulse rate simulation;
◆ Patient state simulation preset;
◆ Can test the reaction time of device;
◆ Can simulate the SpO2 and pulse rate under different amplitude;
◆ Can test the performance of device under different interference source;
◆ Can select different R-curve.
Main Parameters
| SpO2 | 1.Measuring range: 35%~100% 2.Resolution:1% 3.Error: When SpO2 is 75%~100%, the error is the larger between ±2% and ±P(P denotes the precision of the tested oximeter); when SpO2 is 74%~50%, the error is the larger between ±2% and ±P; no define when SpO2 is less than 50%. |
| Pulse rate | 1.Measuring range: 25bpm~250bpm 2.Resolution: 5bpm 3.Error: 1%± 1bpm |
| Amplitude | 1.Measuring range:0.000%~20.000% 2.Resolution:1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%. |
| Patient state | 24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup. |
| Voltage | DC 3.6V~4.2V |
| Power Supply | Voltage 3.7 rechargeable lithium battery × 1 |
| Battery working life | Charge and discharge no less than 500 times |
Hot Tags: contec spo2 pulse rate patient simulator oxygen saturation simulator ms100, manufacturers, suppliers, factory, cheap, buy